EN GJS 500-7 SG Iron

EN GJS 500-7 S G iron stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of EN GJS 500-7 SG iron continuous cast bar available in diameters and a limited range of flat sections. Sometimes referenced as a ductile iron EN GJS 500-7 is a spheroidal graphite iron that offers better strength, wear resistance and hardening capabilities to that of other S G iron grades such as EN GJS 400-15.

400-15 SG Iron is held on stock and can be delivered throughout the UK. All orders are supplied in accordance with our ISO 9001 accreditation.

Related Specifications BS EN 1563 EN16482 GGG50 SFP500 SP500 70-50-05

Alternative EN1561 Cast Iron Grades GJL200 | GJL250 | GJL300 | GJL350 | Spheroidal Graphite Iron | GJS400-15 | GJS600-3

Form of Supply

West Yorkshire Steel are a supplier and stockholder of SG Iron grade EN GJS 500-7 in round bar. This S G Iron grade is available in 3 metre bar lengths or sawn to length to your requirements.

Click here to contact our experienced sales team who will assist you with your EN GJS 500-7 SG Iron enquiry.

Diameter

Click on the headings below for further information

Applications

BS2789 Grade 500-7 is suited for applications such as gears, pistons, valve bodies, dies and moulds and for applications that require good noise and vibration damping.

Analysis

Carbon	3.40-3.85%	Phosphorous	0.10% max
Manganese	0.10-0.30%	Sulphur	0.02% max
Silicon	2.30-3.10%	Magnesium	0.07% max
		Iron	balance

Typical Properties

Typical Tensile Strength N/mm²	Elongation %	Typical Hardness HB
500	7	170-235

Mechanical properties shown are typical and may vary subject to the size and section of this sg iron grade.

Certification

EN GJS 500-7 S G Iron is available with a certificate or conformity, please request when placing any orders.

Quality Assured Supply

EN GJS SG Iron to grade 500-7 is supplied in accordance with our ISO 9001:2015 registration.