EN GJS 600-3 SG Iron

EN GJS 600-3 SG iron stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of EN GJS 600-3 SG iron bar, available in diameters and a limited range of flat sections. Sometimes referenced as a ductile iron EN GJS Grade 600-3 is a spheroidal graphite iron that offers better strength, wear resistance and hardening capabilities to that of EN GJS 500-7 and EN GJS 400-15.

600-3 SG Iron is held on stock and can be delivered throughout the UK. All orders are supplied in accordance with our ISO 9001 accreditation.

Related Specifications BS EN 1563 EN16482 GGG60 70-50-05 SP600 SFP600

Alternative EN1561 Cast Iron Grades GJL200 | GJL250 |GJL300 | GJL350 | Spheroidal Graphite Iron | GJS400-15 | GJS500-7

Form of Supply

West Yorkshire Steel are a supplier and stockholder of SG Iron grade EN GJS 600-3 in round bar. This S G Iron grade is available in 3 metre bar lengths and can be sawn to cut lengths or sawn blanks to your requirements.

Click here to contact our experienced sales team who will assist you with your EN GJS 600-3 SG Iron enquiry.

Diameter

Click on the headings below for further information

Applications

EN GJS Grade 600-3 is suited for applications that require good noise and vibration damping. Typical components include gears, valve bodies, pistons, dies and moulds.

Analysis

Carbon	3.40-3.85%	Phosphorous	0.10% max
Manganese	0.10-0.30%	Sulphur	0.02% max
Silicon	2.30-3.10%	Magnesium	0.07% max
		Iron	balance

Typical Properties

Typical Tensile Strength N/mm²	Elongation %	Typical Hardness HB
600	3	200-260

Mechanical properties shown are typical and may vary subject to the size and section of this sg iron grade.

Certification

BS2789 600-3 S G Iron is available with a certificate of conformity, please request when placing any orders.

Quality Assured Supply

EN1563 SG Iron to grade EN GJS 600-3 is supplied in accordance with our ISO 9001:2015 registration.